Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Why Sandy Springs Homeowners Choose Trane Air Duct Cleaning
Hollis Air Duct Sandy Springs provides independent Trane Air Duct Cleaning in Sandy Springs, GA, with crews who understand how Trane’s variable-speed blowers load up duct interiors differently than single-stage units. We’re not a Trane authorized dealer and we don’t pretend to be. What we are is a company that has spent years cleaning the ductwork downstream of Trane XV20i, XR16, Hyperion, and S9V2 systems in this city, so we know exactly where the buildup hides and how to get it out without damaging your equipment. Call (229) 489-7780 for a written quote before any work starts.
Why Trust Hollis Air Duct Sandy Springs for Your Trane Air Duct Cleaning?
Roy Castellanos and his crew have cleaned more Trane duct systems in Sandy Springs than most companies will see in a career. Roy grew up in Los Angeles and learned his trade fundamentals at Los Angeles Trade-Technical College before spending nearly two decades pulling grime out of Atlanta metro ductwork. He knows the older split-levels near Hammond Park where Trane systems get neglected the longest, and he’ll tell you straight if your ducts need cleaning or if something else is causing the problem.
Here’s what that experience means for your Trane system. A Trane XV20i variable-speed blower pulls air through the return side at a constant low velocity, sometimes 24 hours a day. That’s great for comfort, but it means fine dust and pollen settle in the return ducts and on the blower wheel itself. A single-stage XR16 cycles on and off, so debris bakes onto surfaces during the off cycle. Both patterns create different failure modes, and both are things we see weekly in Sandy Springs homes. We clean for the system you actually have, not a generic air duct cleaning checklist.
Every Trane job includes our 365-Day Done Right Promise in writing. If something isn’t right within a year, we come back and fix it at no charge. That includes a free second visit if needed. We price every Trane cleaning job before we touch the system, and that price does not move at the door.
Styles & brands we work with
Common Trane Air Duct Cleaning Problems We Fix in Sandy Springs
- Variable-speed blower wheel imbalance on Trane XV20i systems. The XV20i’s blower spins at low RPM for extended periods, which lets fine particulate settle on the wheel blades unevenly. Once enough debris accumulates, the wheel gets out of balance and you’ll hear a hum or feel vibration through the floor. We clean the blower wheel with a brush and negative-air setup to restore balance. This is a repair most Sandy Springs homeowners don’t realize they need until the noise starts.
- Mold and biofilm on Trane Hyperion evaporator coils. The Hyperion air handler sits in humid Sandy Springs air for months on end. Standing moisture on the coil breeds mold and biofilm that restrict heat transfer and push musty air through the supply ducts. We clean the coil with professional-grade antimicrobial treatments from Abatement Technologies, not hardware-store spray. The humid air near the Chattahoochee River makes this the single most common Trane issue we handle in riverside neighborhoods.
- Dust baked onto Trane S9V2 heat exchangers. When an S9V2 furnace fires up after sitting through the summer, the dust that settled on the heat exchanger burns off, producing that dusty smell homeowners notice in October. Over time, baked-on debris reduces heat transfer efficiency and can make the furnace run hotter than designed. Cleaning the blower and supply ducts keeps this layer from building back so quickly.
- Clogged return ducts causing high static pressure in Trane sealed systems. Trane designs its variable-speed equipment around tight static pressure tolerances. When return ducts fill with dust and pet hair, static pressure climbs and the blower works harder for less airflow. This shows up as weak cooling and occasionally short cycling on the XR16. We measure static pressure before and after cleaning so you can see the difference in plain numbers.
- Flex duct sagging and debris accumulation in Sandy Springs homes. Many 1980s and 1990s homes east of Roswell Road still have original flex duct that sags and collects debris where the duct dips. This is a Sandy Springs housing stock problem, not a Trane problem, but it affects every Trane system connected to it. We identify sagging sections during inspection and can resecure or replace them as needed.
Trane Parts & Our Repair-vs-Replace Approach
We use OEM-equivalent filters and access panels on Trane systems where they make sense. Genuine Trane parts are well built, but they’re also backordered more often than the manufacturer would like to admit. When a Trane part is on backorder or priced at a level that doesn’t serve you, we use OEM-quality aftermarket components that meet the same specifications. We’ll tell you which we’re installing and why before the work happens.
Our rule on duct repair versus replacement is simple. We only push duct sealing or replacement when leaks are measurable and actually affecting your system’s performance. We have the tools to test for leaks, and we’ll show you the numbers. If cleaning alone restores airflow and static pressure to spec, that’s what we recommend. We’ll never sell you a repair your system doesn’t need, and we’ll never tell you cleaning fixes a leak when it won’t. Call (229) 489-7780 for an honest read on your Trane ductwork.
Our Trane Service Process – Step by Step
- 1
Inspection and diagnosis. We start with a full visual and camera inspection of your Trane system’s ductwork, blower, and coil. We look specifically for the failure modes Trane systems exhibit in Sandy Springs: blower wheel buildup, coil biofilm, and sagging flex duct. You see the video with us while we’re standing there.
- 2
Written quote and scope. Before we touch anything, you get a written price that covers the entire job. No per-vent pricing games. One flat price per system, agreed to on paper before the equipment comes off the truck.
- 3
Cleaning and service. We clean the blower wheel, evaporator coil, air handler, and full duct runs using Rotobrush rotary brush systems and Nikro negative-air machines. The negative-air method means debris gets pulled out of your home, not blown around it. We’re background-checked and uniformed every time.
- 4
Verification and documentation. After cleaning, we re-test static pressure and airflow where applicable. You get before-and-after photos of your own ducts so you can see the work was actually done.
- 5
365-Day Done Right Promise. Everything we do is covered in writing for a full year. If the problem comes back, we come back. At no charge. That’s The Garrison Standard.
See the difference
Before
After
Before
After
Before
AfterTrane Products We Service & Install in Sandy Springs
We service and clean the full range of Trane residential systems installed in Sandy Springs. That includes the XV20i variable-speed air conditioner, the XR16 single-stage condenser, the Hyperion series air handlers, and the S9V2 gas furnace. We work on older Trane models and discontinued series as well. Our focus on this page is air duct cleaning, but the same crew handles evaporator coil cleaning, blower cleaning, and full air handler cleaning on every Trane system we touch. We stock common Trane-compatible filters and aftermarket access panels locally, which means fewer return trips and faster service for your Sandy Springs home.
We Also Service These Brands
Most Sandy Springs homes don’t have a single HVAC brand from attic to crawlspace. We service Lennox and Carrier systems alongside Trane with the same written pricing and the same 365-Day Done Right Promise. If your Trane equipment shares ductwork with another brand’s components, that’s not a problem. We clean the whole system, not just the nameplate.
FAQs – Trane Air Duct Cleaning Service in Sandy Springs
Trane’s XV20i runs its blower at low speed for extended periods, which means air is moving through your ducts almost constantly. The low velocity allows fine dust and pollen to settle in the duct runs and on the blower wheel. A standard filter catches some of it, but fine particulate passes through. This is a known characteristic of variable-speed Trane systems, and it’s why we recommend duct cleaning every three to five years for XV20i owners in Sandy Springs. The pollen load near the Chattahoochee River corridor makes the buildup faster here than in drier parts of Georgia.
Yes. When a Hyperion coil develops biofilm and mold from standing moisture, it insulates the coil and restricts heat transfer. The system has to run longer to hit the same temperature, and it pulls more electricity doing it. Removing that layer restores the coil’s designed efficiency. In Sandy Springs, where humidity keeps coils damp most of the year, coil cleaning on Hyperion air handlers often produces a measurable drop in run time and a noticeable improvement in supply air temperature. Call (229) 489-7780 to schedule an inspection and see your coil before and after.
Trane’s variable-speed equipment is more sensitive to static pressure than many single-stage systems. When ducts get restricted by dust and debris, static pressure rises and the blower draws more power while moving less air. This shows up as weak airflow and can contribute to short cycling. Other brands experience this too, but Trane’s tight tolerances mean buildup affects performance sooner. The fix is straightforward: clean the ducts and air handler, then re-test static pressure to confirm the numbers are back in spec.
It’s common, but not something you should ignore forever. The smell comes from dust that settled on the heat exchanger during the cooling season burning off when the furnace fires. A light odor that disappears after the first cycle or two is normal. A strong smell that lingers means the layer is thick and the blower and supply ducts likely need cleaning. Getting the ducts cleaned before heating season in Sandy Springs eliminates most of that odor and keeps your S9V2 running at its designed efficiency. We recommend scheduling a cleaning in late summer so the system is ready before the first cold snap.
For most Trane systems in Sandy Springs, every three to five years is the honest answer. Homes near the river with older ductwork, pets, or a variable-speed blower running constantly tend toward the shorter end. Newer systems with well-sealed ducts can go longer. We’ll tell you what your system actually needs after a camera inspection, and we won’t sell you a cleaning you don’t need. The humidity and pollen in this area make Sandy Springs a faster buildup environment than dryer parts of metro Atlanta.
Full Trane air duct cleaning in Sandy Springs typically runs $350 to $650 for a full system, including ducts, blower, and air handler. Adding evaporator coil cleaning on a Hyperion air handler adds $150 to $250. Larger homes with zoned systems or heavy contamination fall above that range. We quote the job in writing before any work starts, and that number does not change at the door. Call (229) 489-7780 for a free estimate specific to your Trane system.
Book Your Trane Service in Sandy Springs, GA
Call (229) 489-7780 to schedule your Trane Air Duct Cleaning in North Atlanta, GA or Sandy Springs visit. You’ll get a written quote before any work starts, a crew that shows up uniformed and on time, and a one-year guarantee in writing. That’s how we run every job this city.
Written by Roy Castellanos, Owner at Hollis Air Duct Sandy Springs, serving Sandy Springs since 2004. Clean ducts, straight answers – that’s the whole job.