Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trane Air Duct Cleaning in North Atlanta, GA | Hollis Air Duct Sandy Springs
We provide independent Trane Air Duct Cleaning - North Atlanta, sealing, and repair across the area. The short version: if your Trane system is paired with original flex duct in a hot attic, it is likely pulling in humid air, losing airflow, or carrying mold. That is the most common pattern we see here, and it is fixable without replacing the whole system.
We are not Trane authorized. We are an independent contractor who has spent the better part of two decades working on Trane equipment in North Atlanta homes, including full Trane sales & service support for cleaning and ductwork. If you want a straight read on what your ducts actually need, call (229) 489-7780.
Why North Atlanta Residents Choose Us for Trane Service
Roy Castellanos grew up in Los Angeles, picked up his trade fundamentals at Los Angeles Trade-Technical College, and has spent close to twenty years pulling grime and debris out of ductwork across the Atlanta metro. He and the crew have worked in North Atlanta long enough to know which neighborhoods have the oldest flex duct, which floor plans trap humidity, and which Trane systems get neglected the longest - including when our Dryer Vent Cleaning in North Atlanta is needed too.
That matters because cleaning a Trane system here is not the same job as cleaning one in a milder climate. We know the failure patterns before we even open the attic hatch. We show up uniformed, background-checked, and we write the price down before any work starts. The North Atlanta service area we cover is where we do most of our Trane duct work, and we run every job on The Garrison Standard: arrive inside the quoted window, price it in writing, do it by the book, leave the site clean.
One more thing. Roy has a saying that covers most situations: Clean ducts, straight answers, that’s the whole job. We stick to it.
Styles & brands we work with




Common Trane Air Duct Cleaning Problems We Solve in North Atlanta
These are the specific things we find when a Trane owner in North Atlanta calls us out. Each one is tied to the way homes here are built and the weather your system fights for months every year.
- Mold-coated evaporator coils on Trane Hyperion air handlers. North Atlanta’s humidity feeds microbial growth on coils, and once the coil is coated, the variable-speed blower has to push against higher static pressure. That strains the motor and cuts airflow to every room. We clean and sanitize the coil without removing the air handler cabinet.
- Sagging and kinked flex duct in unconditioned attics. Attic temperatures in North Atlanta regularly exceed 130 degrees in July and August. Flex duct breaks down faster in that heat, sags between trusses, and kinks at support points. A kinked run chokes airflow to Trane XL and XR condensing units, which can cause short cycling. We straighten, support, or replace the runs.
- Sweating ducts and ceiling water stains. When duct insulation degrades in a humid attic, condensation forms on the duct exterior. We see this constantly in Sandy Springs and Dunwoody. The first sign is usually a yellowish water stain on the ceiling. The fix is proper insulation and sealing, not just wiping the duct.
- Return duct leaks pulling in hot attic air. A leak on the return side makes your Trane coil work harder and can overflow the condensate pan during a Georgia summer. We find these leaks with a pressure test and seal them with mastic, which stops the hot air and humidity from entering the system.
- Crushed or corroded metal ducts under slab foundations. Many North Atlanta homes sit on slabs, which means supply ducts run under concrete or through tight crawlspaces. Moisture and shifting soil corrode or crush those ducts, and you will not find the problem without a camera inspection. This is a North Atlanta-specific problem you will not see in neighborhoods with full basements.
Trane Service in North Atlanta: What Local Conditions Mean for Your Equipment
North Atlanta has a huge number of single-family homes built between the 1980s and early 2000s. Many of them still have the original flex duct running through unconditioned attics. That duct was never designed for the heat load our summers put on it. We are not talking about a gradual decline. We are talking about material failure: flex duct outer jackets splitting open, inner liners collapsing, and the wire coil rusting out. Combine that with a Trane Hyperion air handler running a variable-speed blower, and you get a system that pulls attic air into the return stream every time it cycles. That is why so many Trane systems in North Atlanta struggle with humidity even when the air conditioner is working. The coil is cold, but the duct system is feeding it wet, 130-degree air from the attic. No amount of thermostat adjustment fixes that. The fix is cleaning what is cleanable, sealing what leaks, and replacing what has failed.
Trane Models & Products We Service in North Atlanta
We work on the full range of Trane equipment found in North Atlanta homes: the XL Series (XL80, XL90, XL14, XL16), the XR Series (XR80, XR90, XR13, XR14), Hyperion air handlers in the TAM family, and ComfortLink II communicating systems. Our job is usually not the condenser outside. It is everything that moves air to and from it. For duct sealing, insulation, and flex replacement, we use commercial-grade aftermarket components that meet or exceed Trane duct specification. Where performance or fit is critical on the equipment side, we use OEM Trane parts. If your duct system is under 20 years old and the air handler still has service life left, we will recommend repair over replacement every time.
See the difference
Before
After
Before
After
Before
AfterTrane Service Pricing in North Atlanta
Whole-system air duct cleaning for a typical North Atlanta home runs between $450 and $850, depending on square footage, number of supply runs, and how long it has been since the last cleaning. Adding evaporator coil cleaning typically runs $150 to $300 more. Duct sealing with mastic and flex repair is priced by the number of runs we repair, and most jobs land between $600 and $1,400 when multiple runs need work. Nothing is quoted per-vent. You get one flat price for the whole system written down before we start, and that number does not move.
If you want an exact number for your Trane system, call (229) 489-7780. The estimate is free, and we will tell you what the system actually needs. Not what pads an invoice.
Serving North Atlanta, GA - Our Local Coverage Area
We’re based in the North Atlanta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Trane Air Duct Cleaning in North Atlanta
North Atlanta’s summer humidity pushes the dew point inside ductwork high enough that condensation forms on the inner liner, and mold spores, which are always present, get a wet surface to grow on. The fix is to remove the moisture source, not just spray something. That means sealing return leaks, insulating the duct runs, and cleaning the coil so the system removes humidity instead of recirculating it. Call (229) 489-7780 and we will inspect your system and show you exactly where the moisture is coming from.
Yes. We access the coil through the service panel, clean and sanitize it in place, and then work the duct system from the registers and the plenum. Removing the coil is not necessary on most Hyperion units, and leaving it in place avoids the risk of a refrigerant leak. We seal everything with mastic from the inside and outside of the runs.
If certain rooms in your North Atlanta home never reach the set temperature while others get too cold, or if you hear a soft hissing in the walls when the blower runs, the flex runs are likely compromised. Sagging is visible when you look across the attic: the duct should have a gentle arc, not a dip between supports. Kinks happen at truss penetrations and sharp turns. We inspect every run with a camera before making any repair recommendation.
No. Cleaning the ductwork and evaporator coil does not void a Trane warranty as long as the work is done without damaging the equipment. We do not alter refrigerant lines, replace electronic components without your approval, or bypass any safety controls. If a component is under warranty, we will tell you. We use OEM parts where required and document everything.
Duct sealing on a typical North Atlanta Trane system starts around $600 and can reach $1,400 on larger two-story homes with significant flex replacement and multiple leak points. The price depends on how many runs need sealing and how much flex has failed. You will get one written price before any work starts. Call (229) 489-7780 for an exact quote, free.
Service Areas Near North Atlanta
We work throughout North Atlanta and the surrounding communities – Trane service in Sandy Springs keeps us busy every summer, and Trane service in Holly Springs puts us in homes with similar attic conditions. We also cover Stone Mountain, Belvedere Park, and Clarkston, where the housing stock ranges from slab ranch homes to newer two-story builds.
Book Your Trane Service in North Atlanta Today
If your Trane system is fighting North Atlanta’s humidity and losing, we will find out why. Written price first. No pressure. Call (229) 489-7780 to schedule your free estimate.
Written by Roy Castellanos, Owner at Hollis Air Duct Sandy Springs, serving North Atlanta and the surrounding communities.