Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Aprilaire Duct Sealing in Sandy Springs: What to Know First
Aprilaire duct sealing in Sandy Springs typically costs $850 to $2,400 depending on how much of the system needs work, and most jobs are completed in one visit. We’re an independent Aprilaire service provider in Sandy Springs – not a factory warranty station – and we write the price down before any tool comes off the truck. That means you know the number before we start, and it does not change when the job’s done.
This page is for homeowners in Sandy Springs with an Aprilaire air cleaner, humidifier, or ventilation system tied into ductwork that is leaking. If you’ve noticed dust building up fast around the house, rooms that never quite reach the thermostat setting, or warm air sneaking into rooms that should be cool, the ducts are often the problem – not the Aprilaire unit itself. Call (229) 489-7780 for a straight read on what you actually need.
How Aprilaire Products Fail – and How We Fix Them
Aprilaire builds solid equipment. But in Sandy Springs, the ductwork attached to that equipment takes a beating from attic heat, crawl space humidity, and twenty-plus years of Georgia pollen working into every seam. Here’s what we see on a regular basis.
- Aprilaire Model 5000 electronic air cleaner with a leaky return plenum. The cabinet is heavy, and in older Sandy Springs homes the return drop was never braced for it. Over time the cabinet settles and pulls away from the duct collar, opening a gap that sucks attic air into the system. We find this on split-levels near Hammond Park all the time. The fix is re-seating the cabinet, sealing the collar with mastic, and adding support strapping so it doesn’t sag again.
- Aprilaire 700-series humidifier bypass duct pulling loose. The flexible bypass that runs from the supply plenum to the return takes a lot of temperature swing in a Georgia attic. The factory clamps loosen, the foil delaminates, and the bypass starts pulling unfiltered air into the return side. We replace the connection, seal both ends with UL-listed mastic, and test for bypass leakage before we call it done.
- Aprilaire 8126 ventilation control tied to ducts that were never sealed after a remodel. Sandy Springs has plenty of homes from the 1970s and 1980s where a previous owner added a room, a return, or a new supply drop without sealing the connections. The Aprilaire controller runs its cycles faithfully, but the fresh air it brings in leaks out of unsealed joints before it ever reaches the living space. The unit is fine – the ductwork is not. We seal the joints and then verify airflow at the furthest register.
- Aprilaire 1210 and 1410 purifier installations on flexible duct that is kinked or torn. High-efficiency filters add pressure drop, and in Sandy Springs flex runs through tight attic corners – especially in newer neighborhoods off Roswell Road where attics were built fast. The flex gets kinked, then splits at the inner liner. We find this by checking static pressure, then repairing or re-running the flex properly, with the inner liner pulled tight and sealed to the collar.
- Aprilaire fresh-air intake duct on the wrong side of the house. This one sounds odd, but in Sandy Springs it’s real. Some intakes were installed on the west-facing wall where afternoon sun bakes the duct, or near a dryer vent, or low to the ground where landscaping debris piles up. The Aprilaire vent pulls in what’s outside – hot air, lint, grass clippings. We fix the duct sealing issue and often recommend relocating the intake to a shaded, clean-air position. If the duct is compromised, sealing it is only half the job. The other half is giving it clean air to move.
Styles & brands we work with




Our Aprilaire Duct Sealing Process
- 1
You describe what’s happening. Call us at (229) 489-7780. A live person answers – no voicemail loop, no callback queue. We schedule a visit inside a specific window, not a four-hour “sometime tomorrow.”
- 2
We inspect the system before anything is opened. A background-checked technician arrives in uniform, walks the Aprilaire equipment, and checks the ducts, plenums, and connections. We use a static pressure gauge and visual inspection to find where air is actually leaving the system.
- 3
We give you a written price. Before any work begins, you see the number in writing. That price does not move at the door. No “looks like we need to add a few things” after the fact. If the scope changes because we find something hidden, we stop, show you what we found, and agree on a new written price before continuing.
- 4
We do the sealing work. Depending on what’s needed, we use mastic designed for metal ductwork, UL-listed tape for flex duct connections, or a combination. We do not slap leftover hardware-store tape on a leaking system and call it fixed. The material matches the duct.
- 5
We test the system again. After sealing, we check pressure and airflow. We measure at the farthest register. If the numbers haven’t improved, we keep working until they have.
- 6
You get the 365-Day Done Right Promise in writing. If any part of our duct sealing fails within one year, we come back and fix it at no charge. That includes a free second visit. It’s not a verbal “call us if anything’s wrong.” It’s on the paperwork.
See the difference
Before
After
Before
After
Before
AfterWhat Aprilaire Duct Sealing Costs in Sandy Springs
Here are straight numbers, because you should not have to call three companies to figure out what this costs.
| Work Scope | Typical Price Range in Sandy Springs |
|---|---|
| Seal leaking connections at the Aprilaire unit (return & supply plenum) | $150 – $350 |
| Reseal Aprilaire bypass duct or fresh-air intake | $200 – $450 |
| Seal multiple supply or return joints in attic flex duct | $350 – $850 |
| Full-system duct sealing after remodel or shift damage | $1,200 – $2,400 |
| Replacement flex runs or new intake relocation (materials included) | $400 – $1,100 per run |
What moves the price: how much of the ductwork is accessible, how many joints need resealing, and whether the fix calls for repair or replacement of damaged flex. We give you one flat price per system before work starts. Call (229) 489-7780 for an exact quote – estimates are free.
Why Sandy Springs Homeowners Call Hollis Air Duct Sandy Springs for Aprilaire Work
Roy Castellanos and his crew have been pulling debris out of ductwork across the Atlanta metro for the better part of two decades. Roy learned the trade at Los Angeles Trade-Technical College and has worked in Sandy Springs long enough to know these houses – the older split-levels near Hammond Park, the ranch homes off Riverside Drive, the newer construction near the Perimeter. He knows which duct systems hold up and which ones were cobbled together by the lowest bidder.
Here’s what you get with us: a written price before we start, a technician who arrives in uniform inside the window, sealing materials matched to your duct type, and the 365-Day Done Right Promise on paper. If the sealing fails within a year, we return at no charge. No negotiation, no fine print.
We work on all Aprilaire lines, and if your system also has components from other brands – Lennox, Trane, Carrier – our technicians are familiar with the equipment and the ductwork around it. Most Sandy Springs homes are mixed-brand by now, and we’ve seen that enough times to know where the problems tend to hide.
Clean ducts, straight answers – that’s the whole job.
FAQs
No. Sealing the ductwork attached to your Aprilaire equipment does not void the manufacturer warranty on the equipment itself. We’re an independent Aprilaire service provider in Sandy Springs, and we seal what the equipment connects to. The warranty covers the unit, not the duct seams. That said, we make sure the sealing materials we use are appropriate for the duct type – metal, flex, or board – so the equipment keeps doing what it’s designed to do.
If the Aprilaire unit is running fine – filter is good, no error codes, the fan cycles – but rooms are uneven, dust builds up quickly, or your energy bills keep climbing, the ductwork is the usual suspect. In Sandy Springs, we check static pressure and do a visual inspection before recommending anything. If the equipment tests fine but the ducts leak, sealing is the fix, not a new unit. Call (229) 489-7780 and we’ll tell you straight which one it is.
Because they’re not sealing the same thing. Some outfits quote a low number for “duct sealing” and then run a fog machine through the system, coat the inside with an aerosol, and tell you it’s sealed. That’s not the kind of sealing that fixes the gaps at your Aprilaire cabinet or the torn flex in your attic. A price that seems too good to be true usually covers a different job. We give you a written price for the actual sealing work your system needs.
We schedule inside a specific window, and we show up inside that window – in uniform, background-checked, and ready to work. We don’t give you a four-hour window and then call to reschedule. Our phones are answered by a live person around the clock, so when you call to book, you talk to a person, not a machine. Call (229) 489-7780 to get on the schedule.
If our duct sealing work fails within one year, we come back and fix it at no charge – including a free second visit. That’s the 365-Day Done Right Promise, and it’s in writing on every job we do in Sandy Springs. You won’t have to argue about it. You’ll be on the calendar, and we’ll be there.
Written by Roy Castellanos, Owner, Hollis Air Duct Sandy Springs at Hollis Air Duct Sandy Springs, serving Sandy Springs and nearby areas.