Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Nikro Air Duct Cleaning in Sandy Springs: What to Know First
We clean air duct systems built around Nikro negative-air equipment and do it as an independent Nikro service provider, not a manufacturer affiliate. A full-system Nikro duct cleaning in Sandy Springs typically runs $425 to $780 for a single-family home, and most jobs are done in three to five hours. The price is written down before we touch anything, and it doesn’t move at the door. If you own a Nikro system in Sandy Springs and want a straight answer about what it needs, call (229) 489-7780.
Key Takeaways
- Nikro negative-air machines pull debris out under vacuum, which matters for how we sequence the cleaning.
- Written pricing before any work starts, backed by the 365-Day Done Right Promise.
- We service Nikro duct runs in Sandy Springs homes of every era, including older split-levels near Hammond Park.
- Video inspection included, so you see what came out and what’s left behind.
Styles & brands we work with




How Nikro Products Fail – and How We Fix Them
Nikro builds negative-air machines and HEPA filtration units, not the ductwork itself, but the way Nikro gear is configured in a Sandy Springs home has real failure patterns. Here’s what we run into, named plainly.
- HEPA filter loading on Nikro NS and ES series units. When the HEPA filter clogs, the negative-air machine loses pull, and the duct cleaning crew ends up running longer with less suction. We see this in Sandy Springs homes with heavy pollen seasons and older duct runs. We check the filter loading before we start and flag replacement costs separately, never buried in the bill.
- Supply-side duct runs paired with Nikro capture hoods that don’t seal tight. If a hood gasket is worn or a run is oversized, the vacuum pulls air around the hood instead of through the duct. The homeowner gets a cleaning that looks active but leaves debris packed in the far end. We check the seal at every register before we start and swap worn gaskets during the job.
- Return-side duct runs in Sandy Springs split-levels. The older homes near Hammond Park tend to have long return runs with undersized joist bays. We regularly see debris packed into the return side of these systems because previous crews focused on supplies. We clean both sides, every time, and we don’t charge extra for doing the job the way it should be done.
- OEM Nikro filters versus aftermarket. Nikro replacement filters cost more, and some aftermarket filters don’t meet the same pleat count. For warranty-safe work, we use filters that match the unit’s spec. If a homeowner wants to source their own filter, we’ll tell them what to order and install it at the same visit.
- Debris accumulation in Nikro machine cabinets. We open the cabinet, vac out the interior, and check the motor intake screen. A clogged screen makes the unit run hot and cuts suction. It’s a simple fix, and most Nikro owners in Sandy Springs have never had it done.
Our Nikro Air Duct Cleaning Process
A Nikro duct cleaning job at a Sandy Springs home runs in a set order. No shortcuts, no skipped steps, no moving targets on the price.
- 1
Call and schedule. A live person answers. We set a window and show up inside it.
- 2
Walkthrough and written price. Roy Castellanos or one of our techs walks the system, notes the Nikro unit configuration, and puts the price on paper before any work starts.
- 3
Registers sealed and machine staged. We seal the register we’re not working, connect the negative-air unit, and check the HEPA filter loading.
- 4
Supply and return runs cleaned. We run brushes through supply ducts and vacuum returns separately. Nikro capture hoods get checked for seal at every register.
- 5
Machine cabinet serviced. We open the Nikro unit, clean the cabinet, check the intake screen, and replace the filter if you’ve approved it.
- 6
Video inspection and walkthrough. We show you footage from inside the ducts before and after. The job isn’t done until you’ve seen it. Your written guarantee starts the day we finish.
See the difference
Before
After
Before
After
Before
AfterWhat Nikro Air Duct Cleaning Costs in Sandy Springs
Here are the honest numbers for Sandy Springs homes. The price is for the whole system, not per vent.
| Job Type | Typical Range in Sandy Springs |
|---|---|
| Single-family home, full system (supply and return) | $425 to $780 |
| Larger home or split-level with long return runs | $650 to $1,050 |
| Nikro machine cabinet service and filter replacement (parts added separately) | $90 to $210 labor, parts at cost |
| Video inspection (included with full cleaning) | No charge |
What moves the price is access, run length, and how long it’s been since the last real cleaning. Not per-vent games. Call (229) 489-7780 for a free estimate, and the number we give you is the number on the invoice.
Why Sandy Springs Homeowners Call Hollis Air Duct Sandy Springs for Nikro Work
Nikro equipment is common in Sandy Springs homes, and it needs a crew that treats the machine and the ductwork as one system. We do. Roy Castellanos and our techs have worked the Atlanta metro for the better part of two decades, and we know the Sandy Springs layouts, including the older split-levels near Hammond Park where duct runs get neglected the longest. Every job gets a written price before we start, a uniformed and background-checked technician, and the 365-Day Done Right Promise in writing. If something fails within a year, we return at no charge, including a free second visit. We also work on ducts paired with Lennox, Trane, and Carrier equipment, so one crew can handle the whole system without finger-pointing between contractors. Clean ducts, straight answers, that’s the whole job.
FAQs
We’re an independent Nikro service provider, not an authorized warranty repair shop, so warranty claims go through Nikro or your installer. What we do is clean and service the system without voiding that warranty, using filters and parts that match the unit’s spec. Call (229) 489-7780 and Roy can walk you through what’s covered before we schedule.
A full supply and return cleaning takes three to five hours, depending on run length and how much debris has built up. Homes near Hammond Park with long return runs tend to run longer. We’ll give you a realistic window on the phone, not a promise we can’t keep.
HEPA filters are replaced, not cleaned. We check the filter loading on Nikro NS and ES units before we start and tell you if it needs replacing. You approve the part and the cost before we order it. No surprise charges on the invoice.
Most cheap quotes cover supply ducts only, or they quote a per-vent price that balloons once the crew arrives. We quote a whole-system price in writing, and it includes supply, return, and the Nikro machine cabinet. The price on paper is the price on the invoice. Call (229) 489-7780 for a straight number.
Written by Roy Castellanos, Owner, Hollis Air Duct Sandy Springs at Hollis Air Duct Sandy Springs, serving Sandy Springs and nearby areas.